No USB to Serial converter needed, so additional interface boxes – just a USB cable ( *Note, see farther down in the post as to which cable you want to purchase. CAT control as well as PTT via one USB cable from the computer to the radio. This post is about setting up digital communications with the FT-991/991a, with only a USB cable. I have tried the Buxcom, the West Mountain Radio ( The M8, yeah. Buxcom, West Mountain Radio, Signalink, and even MFJ is getting into the market with their own audio device. There are several different types of interface devices that you can purchase to make this connection. The software on the computer generates audio that goes from the computer sound card to the radio as well as from the radio to the sound card. Hams who are running PSK31 or JT65 or FT8/4 or some other digital mode are using a computer connected to an audio interface that is then connected to the radio. See: setting_rigctld_for_all_programs, and log qsos from both programs to cqrlog without problems.Some of you might might be new to digital communications on the ham bands, so let me start from the beginning. How ever if you allow ADIF logger support at wsjt-x and js8call settings and choose remote mode for ADIF from cqrlog you can keep both programs running at same time if your rigctld settings support that. If QSO list window is open and "cqrlog/preferences/NewQSQ/Refresh data after save qso" is checked QSO list is also updated after QSO is logged.ĪDIF remote can not be used at same time as fldigi or wsjt remotes. If this is set, after pressing "OK" at companion program's logging window logged qso will appear to cqrlog's NewQSO recent qsos list. No indication of logging can be seen unless user has set "cqrlog/preferences/NewQSO/Show recent qso records for last X days" active. This is because some versions of js8call send both json and headereless logging frames that would lead to double logging of qsos. This will change when UDP frame is received.Ĭase 1) (see list abowe) it turns to REMOTE ADIF Case 2) (see list abowe) it turns to rmt ADIF hdless Case 3) (see list abowe) it turns to rmt ADIF JS8CALL Case 4) (see list abowe) it turns to rmt ADIF N1MM+ Note: when case 3) frame is received ADIF remote can not receive any other type frames until remote is disabled and again enabled. When remote is selected you will see remote ADIF with red font. Otherwise, when running under same Linux localhost addtess 127.0.0.1 can be used also with N1MM+ If N1MM is run in virtual machine or second computer the IP address of cqrlog computer must be used. ![]() Settings must be done at wsjt-x or js8call Settings/reporting. ![]() Remote mode is activated from NewQSO/File selection list, or pressing Ctrl-K when NewQSO window is focused. 4) Datagram has XML qso record including node contactinfo with subnode IsOriginal:True (N1MM+ qso contact broadcast).3) Datagram has JSON record including 'LOG.QSO","value":' followed by adif tags starting with tag "2) Datagram has qso record without header starting with tag " (used by wsjt-x secondary UDP datagram and older js8call).1) Datagram has full adif export including proper header and one or more qso records.(used by wsjt-x primary UDP datagram). ![]() There is no other finctionality than just transfer the logged data.ĪDIF remote can read adif tags from UDP datagram as follows: ADIF remote connection (former "N1MM+ remote logger") is just for copying logged qso infromation from other program like wsjt-x or js8call (or similars that support this kind of logging) to cqrlog.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |